Electrical Conductance Studies in Aqueous Solutions of Glutaric Acid,Disodium Glutarate and Sodium Hydrogen Glutarate

Conductivity measurements of glutaric acid and disodium glutarate in dilute aqueous solutions were performed in the 288.15 to 323.15 K temperature range. The limiting equivalent conductances of glutarate anions, λ ^o(HGlut⁻,T) and λ ^o(1/2Glut²⁻,T), and the dissociation constants of glutaric acid, K ₁(T) and K ₂(T), were derived by the use of the Onsager and the Quint and Viallard conductivity equations. The applied molecular model was successfully confirmed by analyzing the conductivities of sodium hydrogen glutarate at 298.15 K.     

Sphericities of Double Cosets,Double Coset Representations,and Fujita’s Proligand Method for Combinatorial Enumeration of Stereoisomers

The concepts of double coset representations and sphericities of double cosets are proposed to characterize stereoisomerism, where double cosets are classified into three types, i.e., homospheric double cosets, enantiospheric double cosets, or hemispheric double cosets. They determine modes of substitutions (i.e., chirality fittingness), where homospheric double cosets permit achiral ligands only; enantiospheric ones permit achiral ligands or enantiomeric pairs; and hemispheric ones permit achiral and chiral ligands. The sphericities of double cosets are linked to the sphericities of cycles which are ascribed to right coset representations. Thus, each cycle is assigned to the corresponding sphericity index (a _d , c _d , or b _d ) so as to construct a cycle indices with chirality fittingness (CI-CFs). The resulting CI-CFs are proved to be identical with CI-CFs introduced in Fujita’s proligand method (S. Fujita, Theor. Chem. Acc. 113 (2005) 73–79 and 80–86). The versatility of the CI-CFs in combinatorial enumeration of stereoisomers is demonstrated by using methane derivatives as examples, where the numbers of achiral plus chiral stereoisomers, those of achiral stereoisomers, and those of chiral stereoisomers are calculated separately by means of respective generating functions.     

Adsorption and structure formation of the weak polyelectrolytic diblock copolymer,PVP-<Emphasis Type="Italic">b</Emphasis>-PDMAEMA

This paper reports on the pH-dependent adsorption of weak the polyelectrolytic diblock copolymer poly(2-vinylpyridine)-block-poly(dimethylaminoethyl methacrylate), (PVP-b-PDMAEMA). Aqueous PVP-b-PDMAEMA solutions have been adsorbed on alkaline pretreated silicon substrates. Altogether two copolymers differing in block ratio and molecular weight were used for the investigations. While the electrical charge of both samples in solution was investigated by electrophoretic measurements, the adsorbed polymer layers were studied with ellipsometry and atomic force microscopy (AFM). Depending on pH the electrical charge of both blocks of the diblock copolymer varied. Three different regimes have been identified. Under acidic conditions at pH<5, both blocks are mainly positively charged. At medium pH between 5 and 8, only the PDMAEMA block is positively charged. At pH>8, both blocks are nearly uncharged and a polymer precipitation occurred in solution. Each of these pH regimes was characterized by a specific adsorption behaviour leading to two adsorption maxima at acidic and alkaline pH values, while at medium pH a plateau in the adsorbed amount was observed. Moreover, the structures of the polyelectrolytes formed on the substrate after adsorption were specific to each of the three pH regimes.     

Synthesis,structure, and thermal decomposition of a novel one-dimensional chain complex of manganese(II) with 2,2-diphenic acid and 1,10-phenanthroline

A novel one-dimensional (1D) chain coordination polymer [Mn₂(2,2′-dipha)₂(phen)]_n has been synthesized by hydrothermal reaction, and characterized by elemental analysis, IR spectroscopy, TGA, and X-ray diffraction. Orange crystals crystallized in the monoclinic system, space group C2/c with a = 19.393(7) Å, b = 19.183(7) Å, c = 19.729(7) Å, β = 90.826(6)°, V = 7338(5) ų, Z = 8. In the crystal structure, one manganese atom is six-coordinated with four carboxylate oxygen atoms from one pentadentate 2,2′-dipha ligand and two tetradentate 2,2′-dipha ligands, and with two nitrogen atoms of one phen ligand, giving a slightly distorted octahedral geometry. The other manganese atom is five-coordinated with five oxygen atoms from two tetradentate 2,2′-dipha ligands and two pentadentate 2,2′-dipha ligands and has a trigonal bipyramidal environment. The TGA curve shows that the compound is stable below 310°.     

Swelling behavior of ionically cross-linked polyampholytic hydrogels in varied salt solutions

Ionically cross-linked polyampholytic hydrogels were synthesized by redox copolymerization of acrylamide and an ionic complex of (N,N-diethylamino)ethyl methacrylate and acrylic acid (designated as PADA hydrogel). The swelling behavior of the hydrogels in water indicated that a minimal equilibrium swelling ratio is found when the molar ratio of anionic/cationic monomers was 1.55. In NaCl solution, the hydrogels exhibited the typical swelling behavior of conventional polyampholytic gels. Their equilibrium swelling ratios increased with an increase in the NaCl concentration. In solutions of multivalent ions (CaCl₂ and trisodium citrate solutions), the equilibrium swelling ratios of the hydrogels increased first and were then followed by a decrease with an increase in salt concentration. Interestingly, an unexpected abrupt swelling phenomenon was observed when the fully swollen hydrogels in salt solution were transmitted to pure water. The unique swelling behavior of PADA hydrogels depends not only on the molar ratio of the anionic/cationic monomers but also on the valency of the ions.     

Bioaccumulation study of acrylates in algae (<Emphasis Type="Italic">Chlorella kessleri</Emphasis>) by Py-GC and Py-GC/MS

Acrylate monomers methylmethacrylate (MMA) and cyclohexylmethacrylate (CHMA) bioaccumulation has been determined in aquatic organism, algae (Chlorella kessleri). Algae were collected in amount of 0.4 mg and directly injected to the pyrolytical cell. In algae bodies accumulated monomers were analysed by pyrolysis gas chromatography (Py-GC) and pyrolysis gas chromatography coupled with mass spectrometry (Py-GC/MS). Traces of the accumulated monomers in algae body can be determined after 1-, 2-, 3-weeks of incubation. Maximum content of MMA was determined after 3-week of experiment, contrariwise in the case of CHMA after 2-week exposition. Relationship with pyrolysis temperature has also been studied.     

Intramolecular cyclization of 5-aryl-3-arylamino-4-benzoyl-1h-3-pyrrolin-2-ones to pyrrolo[3,4-<Emphasis Type="Italic">b</Emphasis>]quinolines

It has been shown that 5-aryl-3-arylamino-4-benzoyl-1H-3-pyrrolin-2-ones cyclize in the presence of conc. H₂SO₄ to give pyrrolo[3,4-b]quinolines.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1543–1545, October, 2004.     

Hydrophobicity modification of woven cotton fabric by hydrophobic fumed silica coating

Water repellency of woven cotton fabric was achieved by coating with the aqueous dispersion containing organosilane agent (HDTMS) and fumed silica. The coating agents were applied using padding method and then followed by batching the coated fabric at the ambient temperature for 24 h to allow the condensation reaction between HDTMS silanol group and fumed silica silanol group, rendering silica particles hydrophobic. An ultrasonicator was employed to prepare the homogenous coating dispersion. The water repellency evaluated by water contact angle determination which showed the contact angle over 110° was obtained with low amount of applied HDTMS of 1 wt%. The effect of fumed silica addition on an increase in fiber surface roughness geometry showed the influential result in improving the water contact angle. From durability to washing test, the hydrophobic coatings evidenced from SEM and ATR/FTIR remained adhering to fiber surface, indicating the durability. After washing, the coating on the fabric with fumed silica addition appeared to be scatter particles which made a contribution to the higher contact angle value when compared to sheet-like layer coating in case of HDTMS coating alone.     

Comparison of the fragility index of different eudragit polymers determined by activation enthalpies

The present study aimed to apply fragility index (m) of polymers in the determination of the optimal amount of plasticizer in polymer films. The fragility index of different Eudragit polymers (RS, RL, EPO) was assessed by differential scanning calorimerty (DSC), applying the Arrhenius connection (logq–1/T _g). The fragility of Eudragit EPO films proved to be the highest, while in the case of RS and RL, the increase of the alkyl-chain length caused the increase of fragility. Studying the effect of plasticizer (triethyl citrate, TEC) on the m value of Eudragit RL and RS films, a near linear reduction of the fragility index could be observed between 5–30% TEC concentration, but above 30%, this value leveled out to constant.     

Interfacial and micellar properties of binary mixtures of surfactant and phospholipid in an aqueous medium

Mixed micelles formed by zwitterionic surfactant dimethyldodecylammniopropane sulfonate and short-chain phospholipid 1,2-diheptanoyl-sn-glycero-3-phosphocholine in different proportions in an aqueous medium have been studied physicochemically at an air/water interface and in the bulk by using interfacial tension and pyrene fluorescence intensity measurements, respectively. The critical micellar concentration and free energies of micellization and of interfacial adsorption have been determined. The interfacial study reveals that a mixed monolayer is formed at the air/water interface by the adsorption of surfactant and phospholipid monomers. This has been confirmed by evaluating the interfacial parameters; the maximum surface excess, the minimum area per molecule of a surface-active compound, and the Gibbs surface excess related to surface pressure. The nonideality of mixing, expressed in the terms of the regular solution interaction parameter, #, has negative values over the whole mole fraction range. The negative # values indicate the mutual synergism between the surfactant and phospholipid monomers. The equilibrium distribution of components between micelle and monomer phases was evaluated using a theoretical treatment based on excess thermodynamics quantities evaluated by Motomura's formulation.